Instruments & Meters

SinceVision Launches SGI-N030W Wide-Spot Laser Displacement Sensor

A wide-spot laser displacement sensor for rough surfaces, with synchronised heads for in-line battery electrode thickness measurement.

Lucian PetrescuNovember 17, 20265 min read0 views

A wide-spot laser sensor head directs a broad beam onto textured foil moving between two synchronised measurement heads on a precision gantry.

SinceVision has introduced the SGI-N030W, a wide-spot laser displacement sensor intended for high-speed, non-contact dimensional measurement on rough, textured and irregular surfaces. The company says the sensor uses an expanded laser spot and optical triangulation to address measurement instability that conventional point-spot laser systems can encounter when surface finish varies.

Wide-spot measurement approach

Conventional point-spot sensors concentrate reflected laser energy on a small area. Microscopic scratches, grain boundaries, brushed textures and matte finishes can therefore introduce signal variations that are interpreted as dimensional changes, potentially producing false defect warnings and additional inspection, SinceVision says. The SGI-N030W collects reflected light across a broader surface area, averaging localised peaks and valleys before signal conversion. According to the company, this reduces the influence of surface roughness and optical scattering and provides more stable displacement measurements on materials such as drawn metals, sandblasted surfaces and coated battery foils.

Specifications and interfaces

The sensor has a 30 mm reference distance and a ±5 mm measurement range. SinceVision specifies repeatability of 0.05 µm on a diffuse white target under static conditions and linearity of ±0.02% of full scale across the range. A 50 kHz sampling frequency, equivalent to a 20 µs update interval, is intended to support high-speed measurement and monitoring of dynamic processes. Communication options include RS485, 100Base-TX Ethernet and switchable analogue outputs for 4–20 mA current or 0–10 V voltage signals. Master-slave synchronisation allows two sensors to operate in opposition and measure simultaneously from either side of a component or moving material.

Battery electrode thickness

One principal application identified by SinceVision is in-line thickness measurement of lithium-ion battery electrodes. Coating thickness and uniformity are critical manufacturing parameters that influence energy density, internal resistance and long-term cell stability. Offline inspection with contact micrometers or drop indicators can introduce operator variability and potentially deform wet or uncured electrode materials, while periodic spot measurements do not provide continuous coverage across a production reel, according to the company.

The proposed inspection arrangement uses two synchronised sensors positioned above and below a moving electrode web. Mounted on a calibrated, low-thermal-expansion marble gantry, the opposing sensor heads measure their respective clearances to the material; a system controller combines those readings with the fixed mounting datum to calculate absolute electrode thickness in real time. SinceVision reports production trials demonstrating stable, repeatable thickness measurement within ±0.3 µm at a web speed of 300 mm/s. The 50 kHz sampling frequency is said to provide high longitudinal resolution for detecting localised coating agglomerations, edge thinning and exposed substrate areas before the electrode proceeds to cell winding.

Semiconductor and assembly uses

The sensor is also intended for semiconductor manufacturing, where non-contact measurement matters for sensitive wafer surfaces. Potential applications include wafer position verification, edge detection, height measurement and checks of wafer seating and chuck alignment in atmospheric transfer modules and vacuum load-lock systems. In precision assembly, it can monitor movement of voice coil motors, linear actuators and micro-steppers. Its sampling rate enables capture of transient displacement, mechanical oscillations, settling behaviour and end-stop overshoot across the full measurement range, with position data sent to machine control systems through the Ethernet interface for real-time monitoring and process control.

Surface-related errors

Jack Li, Global Sales and Marketing Director at SinceVision, says false defect warnings caused by surface texture remain a recurring challenge in battery manufacturing and precision assembly. He explains that conventional point-beam laser sensors can interpret microscopic scratches and rough coatings as actual thickness variations, slowing production lines and creating a need for additional manual inspection. The SGI-N030W’s expanded optical spot is designed to average out these surface-related variations, while synchronisation between opposing sensor heads supports high-speed thickness verification, according to the company.