KraussMaffei Extrusion has developed a single-stage extrusion process for PVC roofing membranes that removes the separate heating-cooling-mixing step used in conventional production. The company calls the continuous route PVC InlineMixing and says it can cut energy costs, shorten production time and support a rapid return on investment.
In the traditional two-stage process, PVC powder, plasticizers, additives and fillers are processed batchwise in a hot-cold mixer to make a dryblend. After cooling and intermediate storage, the mixture is plasticized in a twin-screw extruder and formed into membranes. The new process feeds all solid and liquid components directly into the extruder through gravimetric dosing systems.
Continuous feeding replaces dryblend preparation
By eliminating the separate mixing combination, the process avoids the need to invest in that equipment and heats the material only once. KraussMaffei says overall energy consumption and energy costs can fall by up to 75 percent, depending on the formulation, system parameters and location. The company also cites lower space requirements and labor costs, as well as lower maintenance costs because wear parts for the heating-cooling mixer are no longer required. The combination of lower capital expenditure and lower operating costs is intended to improve cost-effectiveness and create conditions for a quick payback.
Production flexibility is another stated benefit. Formula adjustments and color changes can be made directly during operation through the integrated control system, according to the company. This removes the need for time-consuming preparation and interim storage of separate dryblend batches. KraussMaffei also says the continuous process requires significantly fewer staff than a system using dry-blend premixing.
Validation on industrial formulations
The process was developed at the KraussMaffei Extrusion Technology Center in Laatzen and validated with industrial roofing membrane formulations. The trials used a co-rotating twin-screw extruder from the ZE 65 BluePower series, equipped with loss-in-weight feeders for all solid components and multiple liquid feeders for free-flowing formulation components. The ZE BluePower series has a Da/Di ratio of 1.65; KraussMaffei says the combination of high torque and large free volume provides a wide process window for different formulations.
Tests confirmed what the company describes as excellent gelation levels for the PVC and high product quality. The mechanical properties and weldability of the membranes also met industrial requirements, according to KraussMaffei, and the results were validated for several formulations.
First industrial reference plant
PVC InlineMixing is already in use in an industrial production line for PVC roofing membranes. The reference plant reaches a total throughput of 1,800 kg/h using two extruders and two calenders. In that line, PVC, additives and fillers, along with resulting edge trimmings, are continuously processed directly into finished membranes.
“For manufacturers of PVC roofing membranes, this represents a clear competitive advantage: lower production costs, greater flexibility and more efficient manufacturing,” said Christopher Bartel, Head of Sales Flat & Foam at KraussMaffei Extrusion. He added that manufacturers can respond more quickly to new requirements, adjust formulations directly during production and reduce energy and capital expenditure.
